• Fishing
  • Different Type Of Fishing Knots

Different Type Of Fishing Knots

By Paul WalterLast update: 2024-01-29

In the market, as you have read from the previous pages, there are many different types of fishing rods. Among them, there are some used to attach the terminal pins, the other is used to connect the lines together, both ends can be used.

But the important thing here that we want to mention is that you should understand how the knot is between the spindle and the fish. Because if the knot is not careful, your fishing trip will be lost.

Don't be in a hurry, rest assured in this article we will cover the most common knots.

1. Palomar fishing knot

Palomar Knot is usually used by anglers just to attach hook and bait to the end of the line. And when properly bolted, this knot achieves almost the full power of the fishing line.

Notably, this knot is especially effective on braided fishing lines, including fluoro and mono fishing lines. If you take the time to practice, the Palomar knot is easy to do and can tie it in the dark. In short, this knot is very simple, but it is highly effective.

Often the anglers call this knot with many other names such as The Duncan Knot, Homer Rhode Loop, Jansik Special, Trilene Knot, Duncan Special, Offshore Swivel Knot.

2. Uni fishing knot

Uni knotting is useful when tying two separate fishing lines together, usually using monofilament strings. If you are used to using a braided rope, it may take a few more layers to simplify it, but note that this knot will be more difficult if you tie it with a braid. In the market, this knotted is quite popular with many names such as the Grinner Knot; Duncan 's knot.

What is more, they are one of the good quality products for you to choose from for attaching terminals to your lines.

In this case, some fishermen think that the Uni knot is not a sure knot. However, they still make sure to complete your swing trip very well.

3. Double Uni fishing knot

This is the dual single button type used by anglers in both salt and freshwater to connect wires of the same or different strengths.

Overall, it works well and is durable, and is easier to tie than the Blood Knot, so it's also a privilege for beginners as well. For such a great spot today for fly fishing as The Uni Knot forms a closed loop as the fish approach. If you tie the braided rope to the wire, it is recommended that you do eight turns on the smooth braided string and five or more turns with the line. And to better understand how to tie the Uni double, first overlap the connected lines.

Next, take the end of the line from the left and fold in half back and do three to four wraps around both lines and through the loop you made initially. Then pull the end of the card to tighten it.

And just reattach the end of the line on the left, making the same number of wraps as the lines. But when you are using braided rope, you should double the number of wraps. To form a dual single button, drag the vertical lines in opposite directions, slide the two buttons together.

Like the knots above if a little more water will make the knot much tighter. Wet the button and pull the fly, end the card and stand part of the line at the same time. Finally, pull the end of line tag one more time and cut the extra line to 1/8 inch.

4. Surgeon’s fishing knot

This is also an easy knot for beginners. It is also known to be one of the best and easy to knot for connecting lines of equal or unequal diameter. When taking fishing trips in low light and cold weather instead of the complicated Double Uni Knot choose the simplified Surgeon since the Surgeon knot is used to connect lines with different materials. It is just two simple knots, especially when tied properly, it can reach 100% rope strength if you have practice. Understanding how these knots are tied, first stack the card ends of the two strands connecting four to six inches.

Next, make a loop in the overlapping thread and use the thumb and index fingers of the right hand using the thumb and index finger. Also with your left hand, wrap the puppet stand and the card end of the larger piece through the loop twice. Similar to the above mentioned types, it is still a little more water to knot tight before pulling tight.

For better visualization, tie this knot by holding the ends short and long on each side and pulling quickly and tightly. To tie this knot, all 4 ends must be pulled. Make sure the strands fit snugly and the knots tighten, then cut the extra string 1/8 inch. The downside of the bow is that it is huge and cumbersome to carry around.

5. Arbour fishing knot

The Arbour fishing knot is a basic one, though it's not among the hardest to use or the most powerful. But it's not signed since you didn't choose it, we'll show you how to install them, and will make your trip enjoyable. The Arbour knot is a very flexible knot because it can be used to tie the line to the spool of any type of reel, whether it be flywheel, reel or baitcasting.

Although Arbour is not strong enough to pull the fish when biting, it is strong enough to hold in case the rod is lost and the reel is overturned and is forced to pull it up with the rope. Lacing an efficient knot, with a secure connection of the fly wire to the spindle, can keep expensive flying ropes from getting tangled.

Here is how to tie the Arbour knot effectively. Start by wrapping the string around the center post of the reel to which the line is attached to the spool with the end used to tie the knot. Then tie a simple over the top button around the stand with the end of the tag. Continue tying a second overcheck at the end of the card about an inch or two from the first overcheck.

To the end, pull the rope stand to slide the first over the top knot down the spool and the second knot to jam with the first. Then, trim the end of the line tag, so that the Arbour knot does not fly forward.

6. Clinch fishing knot

This is a knot that we recommend from beginners to professional players who should equip themselves because it is very popular everywhere, easy to tie, easy to remember and very durable. The Clinch knot begins to thread the end of the string through the hook eye, and irrespective of the direction of your hand. The next step is to wrap the last tag of the line around the taught line, going back to the roll, four or six times, depending on the degree you want to select.

Furthermore, to create the so-called improved Clinch knot, passing the line through the loop created in the last step, will make the knot tighter and more durable. The last thing to complete is to pull it tight, if it's slightly damp, get a tight knot before pulling it tight.

7. Orvis Fishing knot

Having said that the Orvis knot is a great replacement for the Clinch knot. Because the Orvis knot is perfect for the beginner, and never knew these knots. The goose is like the Clinch knot, it is very suitable for fly fishing. In addition, the Orvis knot has a sturdy and easy to tie knot that can operate up to 30lb in diameter.

The first thing you should do is pass the last tag of the line through the hook eye from below. Then, create a loop by passing the end tag over the stand of the code in the distance.

It is known that the Tippet is a clear sized freight line attached to the end of the wire, where the fly is tied.

Next, you make an eight by crossing the vertical line and thread the end back through the first circle formed. Fold the end of the tag and practice two turns around the loop just created and make sure that the turns start on the far side of the second loop. Add a little water to tighten the knots.

Just tie the second round to the stand by pulling the fly and ending the card. Let go of the top of the card and pull the fly and stand until the button fastens to the eye.

8. Pitzen fishing knot

This is a slightly more complicated structure, but if you practice it many times it should not be a problem. If you plan to fish in large quantities, for extra power and endurance then the Pitzen knot, also known as Eugene Bend or 16-20 knots, is known to hold up to 95 percent of the break strength of the rope.

The practice is as follows first pass a line through the hook eye. Then repeat the line of cards below the vertical line taught.

Using your index finger as a stop, hook the line around your finger. Continue wrapping the wire around the parallel lines four times. Move the end of the card back through the small loop created by your finger. To add tightness, add a little water to the mouth trying for a connection.

9. Snell fishing knot

This is a very popular hook with anglers because the hook has no eyes to be threaded through it. They are very effective for fly fishing, especially can be used to connect to the hook. For the Snell Knot it is the attachment to the hilt of the hook, not the hook eye.

Snell knots can control the position of the hook when you use it, if you are working on frog grass or grass due to its maneuverability. However, they still have some neat downsides: it easily covers a quarter of the hook. In addition, if not tied properly, you could lose fish.

10. Improved Clinch fishing knot

This is an improved version of Clinch knot. The difference is that you will take the card and wrap it around the vertical line four to seven times. Like the other types, dampen the knots for tighter pull.

Clinch knots have the advantage of being able to attach a small diameter puppet to a heavy string hook. With this last knotting it will improve the ability to cling to a large fish. On the contrary, they restrict use with heavier strings like mono over 30 pounds that do not perform well with this line.

11. J fishing knot

J knot is known to be the strongest of all knots. It provides you with the strongest connection. For J knots the durability is outstanding, but sometimes it is not the easiest knot when tying it. Before using them, you should practice them a few times to increase efficiency quickly.

12. Surgeon’s end loop fishing knot

Surgeon's end loop is a straightforward knot and you shouldn't have to spend a lot of time installing it. They can be used to attach the wires and nest two loops together. Then, thread the hook through its ring and pull it tight. Due to its feature it is easy to tie it up quickly and when the loops are executed, it has to attach a sink, a lead or a terminal solver. However, it is not a durable knot when tying a lightweight line.


A key that connects your fishing trip to the professional, without fear that the fish will slip off the hook. We have come up with methods that are the knots to help you improve what you want and share how to tighten and strong. Whether you fish in saltwater or freshwater, this knot will never let you down. However, to get the desired knot you should also practice in order to have a more successful trip.

Related Articles